--- title: "Cantilever Rack in Oak Creek, WI | Long Freight" url: https://milwaukeepalletrack.com/service-area/oak-creek/cantilever-rack description: "Plan long-freight storage near Oak Creek's Ryan Road and airport corridor without blocking dock travel. Talk through handling needs: (414) 260-3593." lang: en --- Image: Cantilever Rack warehouse storage example (https://milwaukeepalletrack.com/__l5e/assets-v1/06d6aaa4-e9b9-437e-ab43-3455e1c1f904/cantilever-hero.jpg) Oak Creek, Wisconsin # Cantilever Rack in Oak Creek, WI Cantilever rack in Oak Creek gives long freight a storage position away from the dock travel path. Open-front arms support bar, pipe, tube, lumber, and suitable sheet loads without front columns interrupting placement. The design needs to connect receiving, storage, and retrieval without treating those movements as separate problems. Cantilever racking can hold elongated inventory between handling stages, but it is not a substitute for adequate staging space. Bundles still need room to turn and transfer. We are the storage division of Warehouse Equipment & Supplies Co., which has been supplying and installing warehouse systems since 1997. (414) 260-3593 ## Check Cantilever Rack Retrieval Movements A storage position is usable only when the load can enter and leave it. Start with the complete movement before selecting component dimensions. 1 ### Draw the freight route Mark unloading, staging, and storage locations. Include the longest carried load in turning checks so a clear empty aisle is not mistaken for adequate operating space. 2 ### Verify the lifting match Record truck type, fork spread, rated capacity at the relevant load center, and lift height. Check attachment dimensions where loads require something other than standard forks. 3 ### Choose the support pattern Set upright spacing and arm elevations for each material group. Short stock and flexible bundles can require more bearing points than longer, stiffer products. 4 ### Compare storage formats Assign palletized freight to selective bays when it fits their openings. Keep open arms for elongated loads that need unobstructed frontage and distributed support. ## Cantilever Rack Outside the Transfer Lane Air cargo and freight-forwarding activity near the Mitchell International Airport south corridor makes the receiving route a useful starting point. Long loads may arrive among conventional pallet freight, yet their carrying width and turning needs differ. A designated storage face should not require trucks to reverse through an active transfer area. Around Ryan Road and Oak Creek Industrial Park, cross-dock operations depend on keeping movement paths clear. Where long products are held rather than transferred directly, the rack footprint must include loaded overhang and base projections. Counting only the upright line understates the floor area committed to storage. Defined long-freight positions Truck-aware row orientation Clear loading-face access Image: Cantilever warehouse racking holding steel tubing (https://milwaukeepalletrack.com/__l5e/assets-v1/a25118ce-d34d-4ccf-9c64-d8b23c1a25ac/cantilever-2b.jpg) Image: Cantilever rack storing lumber and wood products (https://milwaukeepalletrack.com/__l5e/assets-v1/6b939c4a-c975-44e4-8d67-d73344b7d92b/cantilever-3b.jpg) ### Storage Along the Airport Freight Corridor The Howell Avenue corridor and I-94 connect Oak Creek distribution activity with regional freight routes. Where warehouses hold long material, storage should have a deliberate relationship to receiving doors rather than occupy whatever floor remains beside them. Distribution Aerospace components Manufacturing ## Cantilever Rack Configuration and Installation Scope We review equipment fit before settling the final row orientation. A conventional forklift needs suitable forks, capacity at the actual load center, and room to turn with the longest bundle. A side-loader changes the carrying orientation but still requires compatible travel width, transfer clearance, and lift reach at each planned level. Arm reach follows load depth, while arm capacity must match the stated loading pattern. Upright centers follow product stiffness, permissible overhang, and the shortest stored length. Sheet packs may require a broader support surface; loose sheets should not be assigned the same spanning ability as a bound, rigid bundle. Single-sided rows can define an edge between storage and travel. Double-sided rows offer access from two aisles when both faces have room to work. Indoor and outdoor proposals also differ in exposure and protection needs. The supply and installation scope records the selected arrangement and its intended load positions. A free CAD plan connects the storage face to dock travel before purchasing proceeds. Your itemized new-material proposal identifies installation separately; experienced crews assemble the specified arrangement under our scheduling and management. Compare the storage choices for your operation: Oak Creek warehouse planning (https://milwaukeepalletrack.com/service-area/oak-creek); Cantilever storage rack configurations (https://milwaukeepalletrack.com/products/cantilever-rack); Oak Creek pallet flow options (https://milwaukeepalletrack.com/service-area/oak-creek/pallet-flow-rack); Oak Creek drive-in storage (https://milwaukeepalletrack.com/service-area/oak-creek/drive-in-rack). Long freight holding Tube and pipe bundles Lumber packages Supported sheet inventory Call (414) 260-3593: (414) 260-3593 ## Recent Installations A sample of warehouse racking installations. Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://milwaukeepalletrack.com/projects ## Map Your Oak Creek Handling Area Send dock locations, storage dimensions, load weights, and the longest carried length. Add equipment specifications and identify any inventory that will be stored outside rather than inside. Call (414) 260-3593. ### Milwaukee Pallet Rack 7311 W Greenfield Ave. Ste 316 Milwaukee, WI 53214 (414) 260-3593 Monday - Friday: 8:00 AM - 6:00 PM ## Cantilever Rack Handling Questions ### Does cantilever rack require a side-loader? ### How much aisle space does a pipe bundle need? ### Can heavier freight go on longer arms? ### What changes when long freight is stored outdoors? ## Other Rack Types We Supply in Oak Creek ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://milwaukeepalletrack.com/service-area/oak-creek ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://milwaukeepalletrack.com/service-area/oak-creek/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://milwaukeepalletrack.com/service-area/oak-creek/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://milwaukeepalletrack.com/service-area/oak-creek/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://milwaukeepalletrack.com/service-area/oak-creek/carton-flow-rack ## Nearby Areas We Also Serve Our delivery and installation territory covers southeastern Wisconsin, with scope and scheduling agreed for each building. Cantilever Rack in Milwaukee: https://milwaukeepalletrack.com/service-area/milwaukee/cantilever-rack Cantilever Rack in Waukesha: https://milwaukeepalletrack.com/service-area/waukesha/cantilever-rack Cantilever Rack in West Allis: https://milwaukeepalletrack.com/service-area/west-allis/cantilever-rack Cantilever Rack in Wauwatosa: https://milwaukeepalletrack.com/service-area/wauwatosa/cantilever-rack Cantilever Rack in Brookfield: https://milwaukeepalletrack.com/service-area/brookfield/cantilever-rack Cantilever Rack in New Berlin: https://milwaukeepalletrack.com/service-area/new-berlin/cantilever-rack View All Service Areas: https://milwaukeepalletrack.com/service-area Warehouse Relocation in Oak Creek: https://milwaukeepalletrack.com/service-area/oak-creek/warehouse-relocation ## Where We Work Located in Milwaukee, we serve the entire Milwaukee metro with industrial pallet racks and warehouse storage solutions. ### Milwaukee Pallet Rack #### Address 7311 W Greenfield Ave. Ste 316 Milwaukee, WI 53214 #### Phone (414) 260-3593 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Oak Creek? Call (414) 260-3593 or request a quote and we will get a layout started. (414) 260-3593 Tap to Call: (414) 260-3593 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://milwaukeepalletrack.com/#business", "name": "Milwaukee Pallet Rack", "alternateName": "Milwaukee Pallet Rack - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Milwaukee. Free warehouse design consultations, pallet rack installation, and storage optimization services.", "url": "https://milwaukeepalletrack.com", "telephone": "(414) 260-3593", "address": { "@type": "PostalAddress", "streetAddress": "7311 W Greenfield Ave.", "addressLocality": "Milwaukee", "addressRegion": "WI", "postalCode": "53214", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "43.0166", "longitude": "-87.9970" }, "areaServed": { "@type": "City", "name": "Oak Creek", "containedInPlace": { "@type": "State", "name": "Wisconsin" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://milwaukeepalletrack.com/images/logo.png", "sameAs": [ "https://facebook.com/milwaukeepalletrack", "https://linkedin.com/company/milwaukeepalletrack", "https://instagram.com/milwaukeepalletrack" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "Service", "@id": "https://milwaukeepalletrack.com/service-area/oak-creek/cantilever-rack#service", "name": "Cantilever Rack in Oak Creek, WI", "serviceType": "Cantilever Rack", "description": "Plan long-freight storage near Oak Creek's Ryan Road and airport corridor without blocking dock travel. Talk through handling needs: (414) 260-3593.", "url": "https://milwaukeepalletrack.com/service-area/oak-creek/cantilever-rack", "provider": { "@type": "LocalBusiness", "@id": "https://milwaukeepalletrack.com/#business", "name": "Milwaukee Pallet Rack", "telephone": "(414) 260-3593", "url": "https://milwaukeepalletrack.com", "address": { "@type": "PostalAddress", "streetAddress": "7311 W Greenfield Ave., Ste 316", "addressLocality": "Milwaukee", "addressRegion": "WI", "postalCode": "53214", "addressCountry": "US" }, "hasMap": "https://maps.google.com/maps?cid=488996059387221220&output=embed" }, "areaServed": [ { "@type": "City", "name": "Oak Creek", "containedInPlace": { "@type": "State", "name": "Wisconsin" } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://milwaukeepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://milwaukeepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Oak Creek", "item": "https://milwaukeepalletrack.com/service-area/oak-creek" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://milwaukeepalletrack.com/service-area/oak-creek/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Does cantilever rack require a side-loader?", "acceptedAnswer": { "@type": "Answer", "text": "No. A suitable forklift can serve the arrangement if its load capacity, fork configuration, turning space, and lift reach match the stored material. A side-loader is an alternative to evaluate when long-load travel governs the layout." } }, { "@type": "Question", "name": "How much aisle space does a pipe bundle need?", "acceptedAnswer": { "@type": "Answer", "text": "Determine that from the truck and carried bundle together, including approach, turning, placement, and withdrawal. Rack depth alone cannot establish aisle width, especially when a long load projects well beyond the truck body." } }, { "@type": "Question", "name": "Can heavier freight go on longer arms?", "acceptedAnswer": { "@type": "Answer", "text": "Only when those arms and the complete structure are rated for that loading. Greater reach changes the demand on the arm and connection. Select by the stated rating and loading condition, not by visual steel size." } }, { "@type": "Question", "name": "What changes when long freight is stored outdoors?", "acceptedAnswer": { "@type": "Answer", "text": "Exposure influences finish selection, drainage considerations, and product protection. Packaging can also change how moisture is retained around bundles. Describe the outdoor location and material so the support arrangement and protection approach can be assessed together." } } ] } ] ```