--- title: "Warehouse Relocation in West Allis, WI" url: https://milwaukeepalletrack.com/service-area/west-allis/warehouse-relocation description: "Plan a West Allis rack move with measured layouts, labeled teardown and anchored reinstallation. Discuss reuse and new rack: (414) 260-3593." lang: en --- Image: Warehouse Relocation warehouse storage example (https://milwaukeepalletrack.com/assets/warehouse-wide-O2pvp0q5.jpg) West Allis, Wisconsin # Warehouse Relocation in West Allis, WI Warehouse relocation in West Allis, WI begins with a rack-move concern that is easy to underestimate: keeping installation bundles out of the space still needed for daily work. Teardown, inventory transfer and incoming material need separate destinations before the first row is released. Industrial properties around Greenfield Avenue and National Avenue can present different footprints even within older 16–24-foot buildings. Metal fabrication, industrial supply and light assembly each place different demands on access, so the next layout should follow actual loads and working routes rather than copying yesterday's row spacing. (414) 260-3593 ## Rack Relocation Organized Around Available Space Treat warehouse relocation staging space as part of the plan, with a defined location for each component group and inventory phase. 1 ### Inspect before separating parts Capture dimensions, identifying marks and condition while the existing arrangement still shows how frames, beams and accessories relate. 2 ### Resolve the destination layout Review CAD row positions, access needs and load capacities, then distinguish reused steel from new replacements and added bays. 3 ### Bundle for the receiving crew Label released material by installation area and coordinate truck loading so unloading does not bury components required first. 4 ### Check before inventory returns Review rack anchored to the floor and alignment, compare the installation with the accepted drawing and establish which positions are available. ## Warehouse Relocation for Constrained Working Space We examine both the steel and the operating sequence. Existing rack is inspected for visible damage, component identification and available capacity information before reuse is proposed. New replacements cover damaged parts; matching new rack can address additional positions where the destination arrangement calls for them. You work with a division of Warehouse Equipment & Supplies Co.; we have been supplying and installing since 1997. Our consultation separates the material decisions from transport responsibilities while connecting both to the destination CAD drawing and the order in which storage can return to use. Inspect before separating parts Resolve the destination layout Bundle for the receiving crew Image: Pallet rack rows to inventory before a warehouse move (https://milwaukeepalletrack.com/assets/warehouse-aisle-DrDu-B7-.jpg) Image: Warehouse rack layout and clear access aisles (https://milwaukeepalletrack.com/assets/warehouse-wide-O2pvp0q5.jpg) ### Keep Industrial Supply Accessible For industrial supply and metal-fabrication support, small quantities of frequently used material may matter more than moving the largest rows first. Identify that stock early. Assign indoor temporary locations where it can be retrieved without crossing teardown work or the receiving area for rack shipments. Metal fabrication Industrial supply Light assembly ## Pallet Rack Relocation With Planned New Additions Build an inventory of frames, beams, decking and associated components before dismantling. Record dimensions and photograph connections, labels and any visible damage. Keep rejected material distinct from accepted reuse groups, and identify new replacement requirements before packing removes the opportunity to compare parts in their original arrangement. Measure the receiving building's columns, dock positions and usable height. Develop the new-layout CAD plan around loaded pallet dimensions and forklift access, then check load capacities for its beam elevations and intended inventory. A compact building may need fewer rows or different bay lengths to preserve practical handling space. Teardown proceeds only after an agreed inventory release. Label bundles for the destination work zones and coordinate their size, loading order and unloading requirements with the carrier and receiving crew. Inventory transport and general freight responsibilities should be written separately rather than inferred from the rack installation scope. Reassemble to the accepted drawing with rack anchored to the floor. Check alignment, component placement and the configuration's capacity information before reloading. Any matching new bays should be reviewed for connection compatibility and loading requirements, not selected simply because their finish or connector shape resembles the existing rack. Compare the storage choices for your operation: West Allis storage services (https://milwaukeepalletrack.com/service-area/west-allis); Relocation support for West Allis (https://milwaukeepalletrack.com/warehouse-relocation); West Allis pushback choices (https://milwaukeepalletrack.com/service-area/west-allis/pushback-rack); West Allis pallet flow options (https://milwaukeepalletrack.com/service-area/west-allis/pallet-flow-rack). West Allis phased inventory transfers West Allis moves adding new storage West Allis existing component reviews Call (414) 260-3593: (414) 260-3593 ## Recent Installations A sample of warehouse racking installations. Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://milwaukeepalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://milwaukeepalletrack.com/projects ## Warehouse Relocation: Plan the next West Allis storage arrangement Send destination dimensions, existing rack photographs and a list of activities that must continue. We can discuss material choices, work zones and the responsibilities to include. Call (414) 260-3593. ### Milwaukee Pallet Rack 7311 W Greenfield Ave. Ste 316 Milwaukee, WI 53214 (414) 260-3593 Monday - Friday: 8:00 AM - 6:00 PM ## West Allis rack move questions ### Can West Allis rack be reused in a tighter building? ### How do we avoid losing small rack components? ### Can light assembly remain active during teardown? ### What should an I-894-area winter move include? ## Other Rack Types We Supply in West Allis ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://milwaukeepalletrack.com/service-area/west-allis ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://milwaukeepalletrack.com/service-area/west-allis/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://milwaukeepalletrack.com/service-area/west-allis/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://milwaukeepalletrack.com/service-area/west-allis/drive-in-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://milwaukeepalletrack.com/service-area/west-allis/cantilever-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://milwaukeepalletrack.com/service-area/west-allis/carton-flow-rack ## Nearby Areas We Also Serve Our delivery and installation territory covers southeastern Wisconsin, with scope and scheduling agreed for each building. Warehouse Relocation in Milwaukee: https://milwaukeepalletrack.com/service-area/milwaukee/warehouse-relocation Warehouse Relocation in Waukesha: https://milwaukeepalletrack.com/service-area/waukesha/warehouse-relocation Warehouse Relocation in Wauwatosa: https://milwaukeepalletrack.com/service-area/wauwatosa/warehouse-relocation Warehouse Relocation in Brookfield: https://milwaukeepalletrack.com/service-area/brookfield/warehouse-relocation Warehouse Relocation in New Berlin: https://milwaukeepalletrack.com/service-area/new-berlin/warehouse-relocation Warehouse Relocation in Menomonee Falls: https://milwaukeepalletrack.com/service-area/menomonee-falls/warehouse-relocation View All Service Areas: https://milwaukeepalletrack.com/service-area ## Where We Work Located in Milwaukee, we serve the entire Milwaukee metro with industrial pallet racks and warehouse storage solutions. ### Milwaukee Pallet Rack #### Address 7311 W Greenfield Ave. Ste 316 Milwaukee, WI 53214 #### Phone (414) 260-3593 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Warehouse Relocation in West Allis? Call (414) 260-3593 or request a quote and we will get a layout started. (414) 260-3593 Tap to Call: (414) 260-3593 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://milwaukeepalletrack.com/#business", "name": "Milwaukee Pallet Rack", "alternateName": "Milwaukee Pallet Rack - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Milwaukee. Free warehouse design consultations, pallet rack installation, and storage optimization services.", "url": "https://milwaukeepalletrack.com", "telephone": "(414) 260-3593", "address": { "@type": "PostalAddress", "streetAddress": "7311 W Greenfield Ave.", "addressLocality": "Milwaukee", "addressRegion": "WI", "postalCode": "53214", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "43.0166", "longitude": "-87.9970" }, "areaServed": { "@type": "City", "name": "West Allis", "containedInPlace": { "@type": "State", "name": "Wisconsin" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://milwaukeepalletrack.com/images/logo.png", "sameAs": [ "https://facebook.com/milwaukeepalletrack", "https://linkedin.com/company/milwaukeepalletrack", "https://instagram.com/milwaukeepalletrack" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "Service", "@id": "https://milwaukeepalletrack.com/service-area/west-allis/warehouse-relocation#service", "name": "Warehouse Relocation in West Allis, WI", "serviceType": "Warehouse Relocation", "description": "Plan a West Allis rack move with measured layouts, labeled teardown and anchored reinstallation. Discuss reuse and new rack: (414) 260-3593.", "url": "https://milwaukeepalletrack.com/service-area/west-allis/warehouse-relocation", "provider": { "@type": "LocalBusiness", "@id": "https://milwaukeepalletrack.com/#business", "name": "Milwaukee Pallet Rack", "telephone": "(414) 260-3593", "url": "https://milwaukeepalletrack.com", "address": { "@type": "PostalAddress", "streetAddress": "7311 W Greenfield Ave., Ste 316", "addressLocality": "Milwaukee", "addressRegion": "WI", "postalCode": "53214", "addressCountry": "US" }, "hasMap": "https://maps.google.com/maps?cid=488996059387221220&output=embed" }, "areaServed": [ { "@type": "City", "name": "West Allis", "containedInPlace": { "@type": "State", "name": "Wisconsin" } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://milwaukeepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://milwaukeepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "West Allis", "item": "https://milwaukeepalletrack.com/service-area/west-allis" }, { "@type": "ListItem", "position": 4, "name": "Warehouse Relocation", "item": "https://milwaukeepalletrack.com/service-area/west-allis/warehouse-relocation" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can West Allis rack be reused in a tighter building?", "acceptedAnswer": { "@type": "Answer", "text": "Possibly, if the components support a workable arrangement and the intended loads. Measure the destination before deciding how many rows to transfer. A CAD review should preserve handling access rather than force every existing bay into a smaller footprint." } }, { "@type": "Question", "name": "How do we avoid losing small rack components?", "acceptedAnswer": { "@type": "Answer", "text": "Identify hardware and accessories with the component group they serve. Use a bundle schedule that the teardown and installation teams can both reference. Checking the schedule at loading and receiving helps distinguish a missing item from one placed in another work zone." } }, { "@type": "Question", "name": "Can light assembly remain active during teardown?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, when material access and installation work can be separated into defined phases. Keep assembly-support inventory outside released rack zones and maintain its travel route. Do not use those working areas as unplanned storage for dismantled frames and beams." } }, { "@type": "Question", "name": "What should an I-894-area winter move include?", "acceptedAnswer": { "@type": "Answer", "text": "Include indoor staging, weather-aware freight coordination and named receiving contacts. Confirm that unloading space remains available before dispatching components. A clear holding arrangement helps prevent weather-related changes from pushing bundled material into active shipping or assembly areas." } } ] } ] ```