Can a short wall run still hold long bundles?

Possibly, if the upright arrangement gives the material enough bearing and keeps end overhang within the specified limits. Also check the bundle's projection beyond the row and the space needed to load it. Wall length alone cannot establish suitability.

Are open arms preferable to selective bays for every bulky item?

No. Selective bays suit palletized loads needing individual pallet access within defined openings. Open arms are useful when length and loading geometry conflict with front columns. Bulky goods that already fit pallets may belong in selective storage.

Can I store two bundles behind each other on deep arms?

Only where the arrangement is specified for those loads and their retrieval method. The rear bundle may require moving the front one, and both affect capacity. Greater arm depth does not automatically make every position independently accessible.

Can single-sided and double-sided units share one layout?

Yes, when each assembly is specified for its location and loading pattern. Perimeter rows and central rows can serve different stock groups. Compare their full footprints and working aisles rather than assuming the same spacing applies throughout.

Cantilever Rack warehouse storage example

Greenfield, Wisconsin

Cantilever Rack in Greenfield, WI

Name: Milwaukee Pallet Rack
Address: 7311 W Greenfield Ave., Milwaukee, WI, 53214, US
Telephone: (414) 260-3593
Price range: $$

Cantilever rack in Greenfield creates an open-front storage face for long material, using projecting arms rather than front columns around each load opening. Bar, pipe, tube, lumber and supported sheet loads can span several uprights while remaining accessible from the aisle. In a mixed-use warehouse, the challenge is fitting that loading movement around the building's other functions.

Cantilever racking should be planned using the stored load and the handling envelope together. We operate as a division of Warehouse Equipment & Supplies Co.; the company has been supplying and installing rack systems since 1997. Our review considers the arm arrangement alongside doors, columns, stairs and the equipment serving the proposed positions.

(414) 260-3593

Cantilever Rack Placement Before Row Counts

We begin the siting review with a measured plan showing fixed features and usable floor area. A single-sided assembly needs its full base and load projection accounted for; a double-sided assembly requires access to both faces. Neither option should be drawn as a thin line representing only the uprights.

Next, distinguish indoor stock from any outdoor inventory. Exposure, finish and the supporting surface must suit an outdoor arrangement. Indoors, loading clearance and nearby work areas remain central. Sheet packs may need designed decking, while round stock may call for specified retention features on the arms.

Supply and installation scope follows the selected configuration. The material schedule records what each position is intended to carry, helping prevent later substitutions based only on available space.

We provide free CAD with the proposed rows placed among your measured work areas. Our new-material quote sets out component and installation costs; we manage experienced installation crews and schedule assembly around available building access.

Compare the storage choices for your operation: Greenfield warehouse arrangements; Cantilever storage rack configurations; Greenfield pallet flow layouts; Greenfield drive-in options.

Long building sections

Commercial pipe stock

Assembly tube bundles

Sheet packs with decking

Call (414) 260-3593

Cantilever Rack Dimensions From the Inventory

After identifying a workable location, use these load checks to establish the supporting components and accessible storage levels.

Choose arm reach

Measure bundle depth and the required supported footprint. An arm should suit that footprint without relying on an unreviewed projection beyond its end.

Verify load ratings

Check the individual arms and complete upright configuration against maximum weights. Uneven bearing can place more weight on one support than a simple average suggests.

Position the uprights

Use stock stiffness, shortest length and allowable overhang to set support centers. Flexible sheets or narrow sections may require a different bearing arrangement.

Check truck placement

Compare forklift or side-loader capacity and lift geometry with the longest load. Include the approach, withdrawal and travel route beside neighboring work areas.

Cantilever Rack Access Inside Mixed Flex Space

An open front removes one obstruction, not every constraint. A long bundle may still swing across a neighboring work area during a turn. For wholesale distribution or building products inventory, identify the complete pickup and placement movement before using a spare wall run as a storage location.

Around the Layton Avenue corridor and Forest Home Avenue industrial area, flex-space planning can involve office and warehouse functions within one building. Keep long-stock handling distinct from pedestrian circulation and small-parts activity. Shorter single-sided runs may fit the available geometry better than a central row that leaves awkward approaches at either end.

Full load envelope drawn

Fixed features measured

Separate handling zones

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Building Products and Packaging Near 76th Street

Greenfield's 76th Street and Loomis Road areas connect commercial supply with local distribution. Building products and printing or packaging operations may need long-stock support alongside conventional pallet storage, making distinct locations useful for unlike material shapes.

Local distribution

Service parts

Commercial supply

Recent Installations

A sample of warehouse racking installations.

View More Projects

Show Us Your Greenfield Floor Plan

Send load dimensions, maximum bundle weights and truck information with a sketch of fixed building features. Mark where long material enters and leaves storage. Call (414) 260-3593.