Can lumber of several lengths share one row?

Yes, when each assigned position provides the required support. The shortest stock must still reach enough arms, and longer packs must stay within permitted overhang. Separate locations may be needed when the length range is too broad.

Does a longer arm always carry a deeper pack at the same rating?

No. Arm reach and load rating are linked to the specified component and loading conditions. Select the required depth first, then verify its capacity rather than extending the load beyond a shorter arm's intended support.

Can outdoor storage use the same arrangement as an indoor row?

Only after reviewing the outdoor application. Exposure, finish, supporting surface and site conditions may change the specification. Matching the inventory dimensions does not establish that an indoor assembly is suitable outside.

Is double-sided storage worthwhile when one face is picked less often?

It can be, provided both faces remain accessible and the assembly suits the expected loading patterns. Compare the extra aisle requirement with usable positions. Uneven demand does not remove the need to check loading on each face.

Cantilever Rack warehouse storage example

Franklin, Wisconsin

Cantilever Rack in Franklin, WI

Name: Milwaukee Pallet Rack
Address: 7311 W Greenfield Ave., Milwaukee, WI, 53214, US
Telephone: (414) 260-3593
Price range: $$

Cantilever rack in Franklin places long building stock on open-front arms, eliminating front columns that would interrupt loading across the face. Lumber, bar, pipe, tube and properly supported sheet loads can be grouped by length and section. The useful storage envelope depends on more than row length: arm projection, upright spacing and truck access all shape what fits.

For building supply and light manufacturing, cantilever racking can separate full packs from quantities issued to a work area. As a division of Warehouse Equipment & Supplies Co., our business draws from the company's rack supply and installation work since 1997. We begin with the material schedule and the available handling space, rather than selecting components by appearance.

(414) 260-3593

Cantilever Rack Siting Before Component Selection

We evaluate perimeter and central-row arrangements before fixing the number of storage faces. Single-sided units can serve a wall-side position, subject to base clearance. Double-sided units place material on both sides of the upright line, with separate aisle requirements and the specified loading conditions for each face.

Outdoor lumber or pipe positions need exposure-appropriate finishes and a supporting surface suitable for the assembly. Indoor stock may need separation by product family or handling method instead. Sheet packs require a support detail matched to their stiffness; decking should be selected as part of that detail, not added by assumption.

The proposed scope identifies row locations, arm levels and installation requirements. Changing an arm elevation or substituting a heavier bundle can affect the original capacity assumptions.

Your free CAD layout identifies usable arm positions alongside the receiving route. We quote new columns, bases, arms and installation as separate items, then schedule experienced crews and manage the agreed work zones with your team.

Compare the storage choices for your operation: Franklin warehouse layouts; Cantilever storage rack configurations; Franklin pallet flow storage; Franklin drive-in configurations.

Long lumber packs

Building trim bundles

Pipe and tube lengths

Supported panel inventory

Call (414) 260-3593

Cantilever Rack Along the Receiving-to-Issue Path

A storage row belongs in the material journey from unloading to issue. For building products operations around Franklin Industrial Park or Rawson Avenue, that means considering where long bundles turn after receiving and where outgoing quantities are assembled. A rack that holds the inventory but obstructs those movements solves only part of the storage problem.

Selective pallet rack remains useful for packaged hardware and other palletized goods. Open arms address a different load shape, allowing extended stock to span multiple uprights without front-column interruptions. Comparing the systems by load type is more useful than assuming either should handle the entire inventory.

Receiving turns considered

Pack and issue separation

Storage matched to shape

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Building Products Around Loomis Road

Loomis Road and the 27th Street corridor connect Franklin's commercial and industrial activity. For building supply inventory, keeping long packs separate from palletized fittings helps preserve distinct handling paths through a mixed warehouse.

Food processing

Industrial supply

Manufacturing

Configure Cantilever Rack From Length and Weight

Use the complete stock range to establish support and access requirements, including the shorter pieces that remain after issue.

List every stock length

Record full packs and partial lengths. Upright spacing must provide enough bearing points without leaving excessive unsupported ends.

Calculate the supported load

Review the heaviest bundle against individual arm ratings and upright capacity. Include uneven weight distribution rather than assuming every arm shares equally.

Choose useful arm depth

Match arm projection to pack depth and the required seating position. Separate incompatible bundle depths where one arrangement would compromise access.

Prove truck compatibility

Check forklift or side-loader capacity, fork arrangement and lift height. Draw the loaded approach and withdrawal path, not merely an empty aisle.

Recent Installations

A sample of warehouse racking installations.

View More Projects

Outline Your Franklin Storage Requirements

Share stock lengths, pack depths, maximum weights and a drawing of receiving and issue areas. Note whether the proposed positions are indoors or outdoors. Call (414) 260-3593.